Search Results

HOME PRODUCTS SWIMMING POOL WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS Search Results More Fluoride Saturator Sodium fluoride has a reliable saturation solubility of 4%. By keeping excess sodium fluoride powder in a dissolving tank, a constant 4% sodium fluoride saturated solution is maintained. This is then dosed into the water supply, via a metering pump, in proportion to the mains 4-20 milliamp flow signal. The saturator comes as a package all mounted suitable for ease of installation complete with overflow, drain, calibration cylinder, isolation valves and metering pump. Two loading packages are offered. For the smaller plants ProMinent offer their patented 5kg jar loader, for larger plants a vacuum loader. ​ 5kg Jar ProMinent designed and patented a special loader to accept 5kg sealed NaF containers, slice the seal, and allow the powder to dump into the saturator tank. The container can then be flushed, by the push of a button, with clean water to allow the jar to be easily disposed of. ​ Vacuum Loader The vacuum loader especially designed for fluoride, is mounted on the saturator and comes complete with dust extractor, suction wand and a flexible hose. The ProMinent vacuum transfer system is designed to transfer powder from the 25kg bags to the solution tank. ​ With the vacuum loader switched on, the wand is inserted into the container or open bag. The vacuum motor will operate for approx 40 seconds before stopping, the inlet valve will close, and the dump valve will open, allowing the collected powder to drop into the hopper. ​ A cleaning cycle will then begin. Once the cleaning cycle has completed, the dump valve will close, the inlet valve will open and the vacuum motor will start again. ​ Two mandatory flow switches are required. One is taken off the 4-20 mA flow signal via the PLC, the other is normally a mechanical flow switch fitted in the mains water pipeline. A calibration cylinder is provided to accurately calibrate the metering pump against the dosing conditions. The metering pump is code locked to the maximum capacity to prevent overdosing. The metering pump is set to display the total amount dosed. This is compared daily against the total water flow to ensure correct dosing has occurred.

HOME PRODUCTS SWIMMING POOL WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS Search Results More Transfer Pumps Duodos Air-Operated Diaphragm Pump Capacity range: up to 12,000 l/h, discharge lift up to 70 m WC Air driven double-diaphragm pumps, no electrical components are required. Self-priming and safe to run dry. BROCHURE TECHNICAL MANUALS DUODOS 20 DUODOS 50-100 DUODOS 200 DULCO Trans Barrel Pumps Capacity range: according to size 2,800 – 6,600 l/h Used for bottling, draining and transferring liquids from canisters, drums or IBC containers. BROCHURE TECHNICAL MANUALS DULCOTRANS 32/700 DULCOTRANS 41/1000 DULCOTRANS 41/1200 von Taine Centrifugal Pump Capacity range: up to 22,500 l/h, discharge lift up to 23.5 m WC Magnetic coupled centrifugal pump for transferring liquids safely and reliably. Leak-free. BROCHURE TECHNICAL MANUALS VONTAINE 0502 VONTAINE 0807 VONTAIN 1010 VONTAIN 1313 VONTAIN 1820 VONTAIN 2323 ROTADOS Rotary Lobe Pump Capacity range: 25–100 m³/h, 10–4 bar Capable of pumping viscous and abrasive media. Also with reversible direction with valveless construction. BROCHURE TECHNICAL

HOME PRODUCTS SWIMMING POOL WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS Search Results More Sodium Silicofluoride Packages ProMinent offer sodium silicofluoride packages designed in accordance with the NSW Fluoride Act. A typical sodium silicofluoride package might operate as follows: ​ From the storage hopper the powder is fed via a ProMinent dry chemical feeder into the mixing tank. The mixing tank is equipped with a high speed stirrer, overflow and drain pipework and has a retention time of 10 minutes. The solution is then transferred to the injection point by a Spectra positive displacement pump all controlled by an Allen Bradley PLC. The loading of the hopper is normally carried out by one of three ways. By unloading from 25 kg bags via vacuum loader By unloading from the top of a bulk bag via vacuum loader By using a crane and hoist bulk bag unloader​ Our loss of weight system includes 3 load cells that are mounted on a galvanised support frame. A 4-20 mA signal is available for retransmission to the main WTP or to a circular chart recorder. Electrical panels would include for all interlocks as required, together with all necessary sequencing that we normally build into a fluoridation system to comply with the Health Commission and other statutory requirements of NSW. Vacuum Loader (25 kg bags) The ProMinent vacuum transfer system is designed to transfer powder from 25 kg bags to the hopper. The suction wand is inserted in the bag and the air is drawn upwards through a filter to remove any powder particles that are still airborne, before leaving the unit via the vacuum motor. As the powder enters the collection unit, the large volume inside the unit causes the air velocity to drop, allowing the powder to fall to the bottom of the unit. A pneumatically actuated valve at the bottom of the collection unit is used to dump the collected powder into the hopper. A second valve on the suction side prevents powder from blowing out of the wand during the cleaning cycle. ​ Vacuum Loader from top of Bulk Bag A bulk bag vacuum system safely transfers the fluoride powder to the day hopper by unloading from the top of a bulk bag. System operates as follows: A bulk bag is loaded by the operator into the bulk bag trolley via a forklift. The vacuum blower is started and the outlet of the bag is clamped by the operator to the inner connection and the bag tie is then removed. Fluoride powder is then drawn from the bulk bag by the vacuum transfer system through the suction wand to one of the 2 vacuum chambers mounted on top of the storage hopper. After a preset time, operation is switched to the second vacuum chamber for vacuuming and the powder collected allowed to fall into the hopper. After a short dwell time, the first vacuum chamber is purged with compressed air to clean the internal filter screen. When the second chamber is finished, same happens and operation switches back to the first. Operation will continue to swap between each of the vacuum chambers until vacuuming is stopped. ​ Crane and Hoist Bulk Bag Unloader A bag is placed on the lifting frame by attaching all 4 hooks to the top of the bag. The over-head crane is then used to lift the bulk bag over the intermediate "floor" hopper for transferring to the storage hopper ready for metering into the water supply

HOME PRODUCTS SWIMMING POOL WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS Search Results More Calcium Hypochlorite ProDos The ProMinent® ProCal Granular Calcium Hypochlorite feeder generates a dilute solution from granulated dry chemical. BROCHURE

HOME PRODUCTS SWIMMING POOL WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS Search Results More Swimming Pool Water Treatment ProCal The ProMinent® ProCal Granular Calcium Hypochlorite feeder generates a dilute solution from granulated dry chemical. BROCHURE ProCal mini The ProMinent®ProCal mini GranularCalcium Hypochlorite feeder generates a dilute solution from granulated dry chemical. BROCHURE UV Systems UV radiation is a safe, chemical-free and reliable method of disinfection ideally suited for water disinfection in modern water treatment. ProMinent utilise the safety and reliability of UV disinfection in a wide range of applications. PRODUCTS Electrochlorination With ProMinent’s Electrolysis systems there is no longer the need to store hazardous chemicals on site. Ordinary salt is used to produce chlorine. PRODUCTS CO2 The ProMinent CO2 controller is designed to use bottled CO2 in the control of pH levels for Swimming Pool water. CO2 systems have several advantages over hydrochloric acid when used to control pH. BROCHURE WATER CHEMISTRY CONTROLLERS & PACKAGES DCC Pool Packages The ProMinent®DCC pool packages are the ideal system for monitoring and controlling water chemistry parameters on a pH and ORP basis in swimming pools. DCC300 PACKAGE DCC400 PACKAGE DCC500 PACKAGE DCC600 PACKAGE diaLog Pool Package The ProMinent® diaLog500 pool package is the ideal system for monitoring and controlling water chemistry parameters on a pH and free chlorine basis in swimming pools. diaLog500 diaLog600 diaLog700 diaLog800 diaLog900 DULCOMARIN Pool Packages The ProMinent®DULCOMARIN pool packages are the ideal system for monitoring and controlling water chemistry parameters on a pH and free chlorine basis in swimming pools. Up to 16 pools with add on. DULCOMARIN-500 DULCOMARIN-600 DULCOMARIN-700 DULCOMARIN-800

HOME PRODUCTS SWIMMING POOL WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS Search Results More Potassium Permanganate ProMinent offer Potassium Permanganate packages that are easy to load, mix transfer and meter KMnO4 into water supplies for the removal of manganese and iron. ProMinent Australia can supply a variety of packages to suit your requirement including batching tank, dosing tank, vacuum loader, transfer pump and metering pumps. For potassium permanganate we would normally offer a preparation and dosing two tank package for making up to a maximum 2.5% solution. ​ Potassium permanganate comes in 25 kg containers and we recommend the full 25 kg container be emptied with each batch make-up as KMnO4 is hygroscopic so it is not ideal to have granules holding in feeders vacuum loaders or hoppers as the product will form a solid mass. At 2.5% 25 kg will batch up 1000 litres stirred ready for transferring to the dosing tank for metering. We would normally fit a Tomal 50 litre stainless steel vacuum loader (capacity approximately 10 to 15 kg/min). Both tanks are fitted with the necessary inlet, overflow and drain connections. The PE preparation tank is fitted with a slow speed stirrer with adjustable timer. The dosing PE tank is fitted with level switches. Once the tank reaches the bottom ‘batch’ level the solution in the preparation tank would either automatically transfer or be manually started by the operator, controlled by level switches. Transfer is via a mag drive centrifugal pump at around 6000 l/h, controlled from the local ‘mimic’control panel with Allen Bradley PLC. ​ ​ Easy loading from 25 bg cannister with specially designed vacuum loader removing the need for platforms and lifting devices Supplied with control panel for automation Controls and alarms to indicate malfunction Custom built to suit particular site and capacity requirements

Chlorine Dioxide Chlorine dioxide is an extremely reactive gas, and because of its instability, cannot be stored. It must only be produced in the required quantities in special generators on the site where it is used. Chlorine dioxide offers a number of advantages when compared with chlorine for water disinfection. Chlorine being the disinfectant mainly used. The disinfecting power of chlorine dioxide actually increases slightly with increasing pH, whereas with chlorine the disinfecting power reduces. Chlorine dioxide remains stable in the pipeline system over a longer period and ensures microbiological protection of the water for many more hours, or even several days. Ammonia and ammonium, which cause significant chlorine depletion, are not attacked by chlorine dioxide, so chlorine dioxide is fully available for bactericidal action. Chlorophenols, the compounds with intense odours, that are often produced during water chlorination, are not formed when chlorine dioxide is used. Trihalomethanes (THMs), a group of substances, which, like their best known example, chloroform, (are suspected of being carcinogenic) are produced when chlorine reacts with natural water components (humic acids, fulvic acids, etc.). Measured THM concentrations, are drastically reduced, if present at all,when chlorine dioxide is used. Advantages of chlorine dioxide : Disinfection power is independent of pH. High residual effect thanks to long-term stability in the pipeline system. Reduction of the biofilm in pipelines and tanks, hence reliable protection of entire water systems against legionella contamination. No reaction with ammonia or ammonium. No formation of chorophenols and other intense odour compounds which can be produced in water chlorination. No formation of THMs and other chlorinated hydrocarbons, no increase in the AOX value. HOME PRODUCTS SWIMMING POOL WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS Search Results More Bello Zon® CDLb Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, using the acid/chlorite process with diluted chemicals. 0 – 120 g/h preparation capacity with storage of up to 60 g of chlorine dioxide for peak metering. BROCHURE Bello Zon® CDEb Chlorine dioxide system which continuously produces ClO2 using the acid/chlorite process with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual or control via contacts. 5 – 200 g/h chlorine dioxide. BROCHURE Bello Zon® CDKc Chlorine dioxide system for continuous production, metering and monitoring of chlorine dioxide with concentrated chemicals. With integrated intrinsically safe pre-dilution station 8 – 12,000 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO2 metering is 60,000 m3/h BROCHURE Bello Zon® CDVc Chlorine dioxide system for monitoring and metering chlorine dioxide and diluted chemicals. 1 – 2,000 g/h chlorine dioxide. BROCHURE

HOME PRODUCTS SWIMMING POOL WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS Search Results More Operating Instructions SOLENOID PUMPS Solenoid Pumps (General) Beta 4b & 5b Gamma X Delta Concept Plus Pneumados Concept Plus MOTOR DRIVEN PUMPS Motor Driven Pumps (General) Sigma S1Ba Sigma S1Cb Sigma S2Ba Sigma S2Cb Sigma S3Ba Sigma S3Cb Sigma S2HK Alpha Vario Vam C Meta PROCESS METERING PUMPS Hydro 2,3 &4 Makro TZ HM HK HMH Makro 5 HK HM HNH Meta HM-HK Extronic EXBa EXBb ​ INSTRUMENTATION Compact Controller pH & ORP Compact Controller Chlorine Dialog DaCb Dulcomarin 11 Swim Pool D1C b & c ​ ​ Technical Data SOLENOID PUMPS Beta Gamma X Delta Extronic Pneumados MOTOR DRIVEN PUMPS Alpha Sigma 1 Sigma 2 Sigma 3 Hydro 2,3 &4 Makro TZ HM Makro TZ HK Makro 5 Meta HM-HK Vam C INSTRUMENTATION Compact Controller D1Cb Dialog DMT Dulcomarin 11 Fluoride Analyser Amperometric Probes ACCESSORIES Tanks and bunds Pulsation Dampeners ​ GAS CHLORINATION 900 Series 900 Series Sequencing Flow Proportioning ProGuard Leak detector Accessories

HOME PRODUCTS SWIMMING POOL WATER TREATMENT CHEMICAL DOSING SKIDS FEEDER PACKAGES CONTACT US TECHNICAL VIDEOS Search Results More Brochures GENERAL Metering Technology Measuring, Control and Sensor Technology Water Treatment and Disinfection Complete Dosing Systems Pure Water for Health Chemical Fluid handling Keeping Everything Flowing Warm Water Disinfection ​ SOLENOID PUMPS Beta Gamma L Gamma L Profibus Gamma X Gamma XL Delta Concept Plus Pneumados ​ MOTOR DRIVEN PUMPS Alpha Sigma 1 Sigma 2 Sigma 3 DULCO flex Control Vario C ​ PROCESS METERING PUMPS Extronic Hydro 2 Hydro 3 Hydro 4 Makro TZ flyer Orlita Complete Orlita DR Orlita High End COOLING WATER Making the most out of Cooling Water Safe Protection against Legionella ​ CALCIUM HYPOCHLORITE ProCal ProDos FEEDER PACKAGES Dry Materials Feeder Fluoride Packages Lime PAC Tomal Polymer Systems (visit Tomal Web site) ​ FOOD & BEVERAGE Food and Beverage Water Treatment and Disinfection for the Beverage Industry ​ GENERATORS CI02, CI, O3 Bono Zon Visions Ozone for Disinfection and Oxidation Chlorinsitu MEASURING & CONTROL Reliable Measurement and Control Dulcometer Measuring and control Technology On- Line measurement of Chlorite Precise pH for safe Processes Compact Controller ​ MINING, OIL & GAS Reliable Solutions for Oil & Gas Industry ​ TRANSFER PUMPS DULCO®flex Spectra ANCILLIARIES Tanks and bunds Water Softeners Dulcoflow POOL SYSTEMS CO2 DulcomarinII DCC 300 Pool Controller DCC 400 Pool Controller DCC 500 Pool Controller DCC 600 Pool Controller Dialog 500 Pool Package Dialog 600 Pool Package Dialog 700 Pool Package Dialog 800 Pool package DulcomarinII 500 Package DulcomarinII 600 Package DulcomarinII 700 Package DulcomarinII 800 Package ​ ​ I'm a paragraph. Click here to add your own text and edit me. It's easy.

Service Technician NSW – ProMinent Australia Attractive Remuneration Package + Superannuation. Fully maintained service vehicle/phone/iPad. Water treatment products and services – New South Wales Office: ​ The Company ProMinent Fluid Controls in Australia has been operating since 1976 and is focused on the manufacture, supply, installation and service of Chemical Dosing and Water Treatment Systems, Dosing Pumps, On-Line Instrumentation, UV, Ozone, Gas Chlorination, and associated equipment. The ProMinent Group internationally has over 2,000 employees worldwide. With subsidiaries in 60 countries and a further 53 authorised agencies, ProMinent offer worldwide service and backup. The Role A customer focused person with an interest in field operations is ideally suited to this position. This opportunity offers great flexibility within a supportive work environment. The work involves on-site service of our equipment within the Sydney metropolitan area and Country New South Wales, customer management, phone support & small project work. Working predominantly as our frontline customer service support, it is critical that you embrace our customer focused culture and provide high level customer service support. You will have strong interpersonal skills and a strong attention to detail and strong follow through. This role is well supported by a team of senior technical staff who will assist you during your induction phase and provide ongoing in-house product and systems training. Skills & Requirements Valid Australian Driver’s License Previous experience within the Water/Wastewater Industry Strong Problem-Solving capability and technical skills Have effective written and verbal communication skills Flexible to travel and comfortable working independently To provide an expression of interest in this role, please email hr@prominentfluid.com.au or complete form below. Thank you in anticipation of your interest in this opportunity with ProMinent Australia. Please upload your CV here. Upload File Upload supported file (Max 15MB) SUBMIT Thank you for submitting your CV. We will be in touch soon.

Employment Opportunities at ProMinent I am interested in the following Sales Engineering Service WHS Accounting Administration Mechanical/Electrical Fitting Salary expectations $70 - 90K $90k - 110k $110k + Please upload your CV here. Upload File Upload supported file (Max 15MB) SUBMIT Thank you for submitting your CV. We will be in touch soon.

SUBMIT